Publicité
Les langues disponibles
Les langues disponibles
GENERAL INFORMATION
These are the mounting instructions for UP_SIDE. Carefully read these instructions before installing and co mmissioning.
It is reco mmended to have one or more qualified persons carry out the installation only. Take the hood carefully out of the
packaging.
The hood is to be used in a table top and it is intended for household use only.
Check with the help of the drawing given below whether all mounting materials and accessories have been included in the
delivery.
1
INSTALLATION
Choose whether UP_SIDE and the dominos or cooking plate are to be mounted as 'surface mounting' or as 'flush mounting'.
1.1
CUT-OUT IN THE TABLE TOP FOR SURFACE MOUNTING
Cut an opening in the table top with the following dimensions:
X =
502 mm (tolerance -0/+1 mm) for UP_SIDE and cooking plate above UP_SIDE. For the appliance besiUP_SIDE the cut-
away must be 490 mm.
Y = the overall dimensions of the domino + UP_SIDE(s) -10 mm
NOTE:
The most co mmon applications of UP_SIDE with domino or an induction hotplate can be found at the back of the annexes.
1.2
CUT-OUT IN THE TABLE TOP FOR FLUSH MOUNTING
Cut-out in the table top:
X =
502 mm (tolerance -0/+1)
Y = the overall dimensions of the domino + the distance in between must every time be 2 mm + UP_SIDE(s) - 10 mm
EN 20
Publicité
