Changing The Oven Bulb; Protective Glass Panels; After-Sales Service; E Number And Fd Number - Blaupunkt 5BD350 Série Notice D'utilisation

Changing the oven bulb

If the oven light bulb is damaged it must be replaced. Special
25 W, E14, 220 V-240 V heat-resistant light bulbs (to 300 ºC
temperature) can be obtained from the Technical Support
Service or in specialist shops. Only use this type of bulb.
:
Risk of electrical discharge and the resulting shock.!
Disconnect the appliance from the mains. Ensure that this is
turned off.
Place a dishcloth into the cold oven to avoid damage.
1.

After-sales service

Our after-sales service is there for you if your appliance needs
to be repaired. We will always find the right solution in order to
avoid unnecessary visits from a service technician.

E number and FD number

When calling us, please give the product number (E no.) and
the production number (FD no.) so that we can provide you with
the correct advice. The rating plate containing these numbers
can be found on the right-hand side of the oven door. You can
make a note of the numbers of your appliance and the
telephone number of the after-sales service in the space below
to save time should it be required.

Energy and environment tips

Here you can find tips on how to save energy when baking and
roasting and how to dispose of your appliance properly.

Environmentally-friendly disposal

Dispose of packaging in an environmentally-friendly manner.
This appliance is labelled in accordance with
European Directive 2012/19/EU concerning used
electrical and electronic appliances (waste electrical
and electronic equipment - WEEE). The guideline
determines the framework for the return and recycling
of used appliances as applicable throughout the EU.

Saving energy

Preheat the oven only if this is required by a recipe or is
■
indicated in the tables.
Use dark, lacquered or black enamel baking tins. These are
■
more efficient at absorbing heat.
Keep the oven door closed during cooking, baking and
■
roasting cycles.
Remove the glass protection by unscrewing it to the left.
2.
Replace the bulb with a similar bulb.
3.
Screw the protection glass back into place.
4.
Remove the dishcloth and switch the oven back on at the
5.
mains.

Protective glass panels

Damaged protective glass panels must be replaced. Protective
glass panels cay be obtained from the Technical Assistance
Service. Please quote your appliance's product number and
production number.
E no.
After-sales service O
Please note that there will be a fee for a visit by a service
technician in the event of a malfunction, even during the
warranty period.
After-sales contact details for all countries can be found in the
attached after-sales service directory.
When baking several cakes, these should be preferably
■
baked one after the other. The oven will still be hot, thereby
reducing the cooking time for the second cake. Two
rectangular baking tins can be placed side-by-side.
For long cooking times, the oven may be turned off
■
10 minutes prior to the specified time, allowing the item to
continue to cook but taking advantage of the oven's residual
heat.

Hot air eco

With Hot air eco ‰ , a considerable amount of energy can be
saved when cooking dishes on one level. When cooking,
baking or roasting, the oven does not need to be preheated.
Notes
In order to ensure that this energy-saving level runs as
■
efficiently as possible, you must place the dish in the oven
when it is cold and empty.
During roasting, the oven must only be opened when it is
■
absolutely necessary, e.g. to turn the food. In the "Tables and
tips" section, you will find numerous suggestions and
recommendations for baking and roasting.
FD no.
41