Télécharger Imprimer la page

Beurer HK 37 To Go Mode D'emploi page 12

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 18
• Cleaning and maintenance carried out by the user must not be per­
formed by children unless supervised.
• This heat pad is not designed for use in hospitals.
• Do not insert needles.
• Do not use when folded or bunched up.
• Do not use if wet.
• This heat pad must only be used in conjunction with the battery
pack/powerbank specified on the label.
• The electrical and magnetic fields emitted by this heat pad may
interfere with the function of a pacemaker. However, they are still well
below the limits: electrical field strength: max. 5000 V/m, magnetic
field strength: max. 80 A/m, magnetic flux density: max. 0.1 milli­
tesla. Please therefore consult your doctor and the manufacturer of
your pacemaker before using this heat pad.
• Do not pull, twist or make sharp bends in the cables.
• Please check the heat pad and powerbank frequently for signs of
wear and tear or damage. If any such signs are evident or if the heat
pad or powerbank have been used incorrectly, they must be checked
by the manufacturer before being switched on again.
• If the connection cable of this heat pad is damaged, it must be
replaced by the manufacturer, its customer service department or a
similarly qualified person to avoid any risk.
• When this heat pad is switched on:
– Do not place any objects on it (e.g. suitcase or washing basket)
– Heat sources, such as hot water bottles, heat pads or similar must
not be placed on the pad.
• Do not expose the powerbank to direct sunlight or high tempera­
tures. Otherwise the powerbank could overheat and be damaged
irreparably.
• Never expose the powerbank to extreme heat. This applies in par­
ticular to storage in a car. Extreme temperatures can occur inside
the vehicle and in the glove compartment when the vehicle is parked
for a long period of time. Therefore, remove the powerbank from the
vehicle.
• The powerbank must never be charged and run down at the same
time.
• Never charge the powerbank using the USB port on your computer,
as this could become overloaded.
• Do not cover the powerbank with covers, cushions, or similar during
charging in order to prevent overheating.
12

Publicité

loading