Thrustmaster T3PA Pro Manuel De L'utilisateur page 7

INSTALLING THE 2 LATERAL ARCHES (1)
Positions of the pedal set's 2 lateral screw threads (1 upper + 1 lower) in order to attach the 2 lateral
arches (1):
- Place one of the plastic washers (3) on the screw thread located on the lower part of the pedal set.
- Next, place one of the arches (1) on the screw thread located on the upper part of the pedal set
and on the plastic washer (3).
- Attach the arch (1) using 2 of the M8-type Allen screws (2) and the 6 mm Allen key (4) by turning
the screws clockwise.
- Repeat this procedure on the other side of the pedal set to attach the second arch.
You are now ready to play!
6/17