Télécharger Imprimer la page

Ralston Instruments FieldLab Guide De Démarrage Rapide page 33

Manomètre

Publicité

North America:
North America (With Solar Panel
installed):
This product conforms to the following
standards:
This product conforms to the following
standards:
This product is certified to the
following standards:
WARNINGS:
i WARNING: DO NOT CHARGE BATTERY IN CLASS I, DIV 1/ZONE 0 HAZARDOUS LOCATIONS.
i WARNING: DO NOT CONNECT TO POWER PORT IN CLASS I, DIV 1/ZONE 0 HAZARDOUS
LOCATIONS.
i WARNING: EXPLOSION HAZARD. IN DIVISION 2 LOCATIONS DO NOT DISCONNECT POWER
PORT WHILE THE CIRCUIT IS LIVE UNLESS THE AREA IS KNOWN TO BE FREE OF IGNITABLE
CONCENTRATIONS.
i WARNING: DO NOT REMOVE OR REPLACE BATTERY OR RF MODULE IN HAZARDOUS
LOCATIONS.
i WARNING: SUBSTITUTION OF COMPONENTS MAY IMPAIR INTRINSIC SAFETY.
i WARNING: TO PREVENT IGNITION OF FLAMMABLE OR COMBUSTIBLE ATMOSPHERES,
DISCONNECT POWER BEFORE SERVICING.
Safety Instructions for Hazardous Locations
• Do not use FieldLab until you have read and fully understand the instructions and hazards of the
product.
• Any modifications to this product with custom parts can result in hazardous operation of the
product.
• Use eye protection while using this product.
• The installation of FLP1 must be in accordance with Ralston Instruments installation instructions.
• The installation must be in accordance with applicable national or International standards.
Certifications
If RF Module P/N DGAU-0046 is installed the following approvals apply:
RF Module Agency Certifications
United States (FCC)
Contains FCC ID : VW4A091732.
This equipment complies with Part 15 of the FCC Rules.
Class I, Division 1, Groups A-D, T4
Class I, Zone 0, AEx ia IIC T4
-10 °C ≤ Ta ≤ 50 °C
Class I, Division 2, Groups A-D, T4
-10 °C ≤ Ta ≤ 50 °C
EN 60079-0:2009/08/01
EN 60079-11:2007
EN 60079-26:2007
IEC 60079-0, 2011/06/22 Ed: 6
IEC 60079-11, 2010/01/28 Ed: 4
IEC 60079-26:2009
ISA 12.12.01
UL 61010-1
UL 913
CSA C22.2 No 157
CSA C22.2 No 213
CSA 61010-1
31

Publicité

loading

Ce manuel est également adapté pour:

Flp1