Connecting Usb Devices - Zappiti Duo 4K HDR Manuel D'utilisation

12
External USB Drive
If you are using an external HDD 2.5'', please use
the USB cable provided with your HDD for best
performance.
Zappiti back panel
Using Internal Drive
To insert the internal 3.5'' SATA HDD, please open the rack door, then insert the drive into the internal
enclosure until 3/4, then complete the installation by closing the door. This operation will complete the
installation of the disk into the rack. The Zappiti media player is compatible with drives formatted in
NTFS, ExFAT, FAT16, FAT32, HFS, EXT2/3. It is not possible to format hard drives via the Zappiti.
You must use a computer for this purpose. In case of NTFS GPT, please use 64 Ko allocation tables.
To use a 2.5" internal drive, please use an adapter box.
Note: Please make sure that your hard drive is correctly formatted before you insert it in the tray.
The hard drives dedicated to NAS are not compatible.
More info: zappiti.uservoice.com/knowledgebase
Zappiti Front Vue
Using SD / MMC Memory Cards
To use a memory card on the Zappiti Duo 4K HDR, you must acquire an external memory card reader to connect
to one of the available USB ports. Then insert the card into the memory card reader. It will be detected as a USB
device (USB icon on the home page). Some SD memory cards may not be compatible with the reader or may
malfunction. In this case, use another model of memory card.
User Guide
External HDD

Connecting USB Devices

You can connect your USB drives to one of the
available USB ports. If you want to play video
files, USB 2.0 is enough to support very high
bitrate (up to 480 Mbps). If you want to trans-
fer files, we advise you to use USB 3.0 or USB
Type-C (not available on Zappiti Mini 4K HDR
model).
***Note: A dedicated USB icon located on the
home page can help you to detect if the drive
is connected correctly.
Power provided by USB ports may not be
enough to allow the USB drive to function
correctly; depending on the drive. Please do
not disconnect or switch off the USB drive
during write (copy / transfer) operations.
The Zappiti players are compatible with UASP
HDD docking stations as well as USB hubs.
Open the tray and insert the HDD,
keeping the connectors on the front
Pre-formated HDDs are
available on sale here:
store.zappiti.com