Connecting Usb Drives; Using Internal Hdd; Using Sd Memory Cards - Zappiti Player 4K Guide De Démarrage Rapide

Zappiti Player 4K Quick Start Guide
12

Connecting USB Drives

Before connecting a USB drive, start ES Explorer. The player will recognize the USB drive, and will show an item
corresponding to the USB drive on the local source list located on the left.
USB drive. Power provided by the USB ports of the player may not be enough for correct functioning of the USB drive.
Do not disconnect or switch off the USB drive when some write operation is in progress.

Using Internal HDD

To insert the internal 3.5" SATA HDD, open the HDD rack door, insert the HDD into the HDD rack and close the HDD
rack door. The player will recognize the internal HDD, and will show an item corresponding to the internal HDD on the
local source list in ES Explorer.
Do not eject the internal HDD when some write operation is in progress. It is recommended to use "green" HDD models
with small RPM value, small heat emission, and small power consumption. The Zappiti Player 4K is not able to format
HDD. To format an HDD, please use dedicated format software on your computer. The Zappiti Player 4K is compa-
tible with pre formated HDDs up to 6 TB (NTFS, FAT16, FAT32, HFS, EXT2/3).

Using SD Memory Cards

To use a memory card, insert it in the memory card slot located on the left side of the media player. The Zappiti Player
4K will recognize the memory card, and will show an item corresponding to the memory card on the local source list
in ES Explorer. Some SD memory cards may not be recognized by the player or may work incorrectly; in such a case,
use other models of memory cards. Do not eject the SD memory card when some write operation is in progress.