I Nstructi Ons For Use / Engli Sh; Technical Data; First Use And Charging The Powerpacks - therm-ic PowerPack Max Mode D'emploi

I NSTRUCTI ONS FOR USE / ENGLI SH

 Powerpacks are protected against spray water. If
you have attached the Powerpacks to your shoes,
the packs should always be connected to the
heatable soles when outdoors (even if not
switched on). This will prevent moisture and dirt
from entering the connecting socket or plug. If
water does enter the connectors, drain the
Powerpack and let it dry.
 For recharging, only use the original Therm-ic
charger. It is designed for indoor use and must
not be exposed to damp.
 Do not insert any metal or other object into
connecting sockets or plugs as this could cause
damage to the unit.
 Since the Powerpack contact pins are still
electrically live even when switched off, never
store the Powerpack with metal objects (such as
paperclips, aluminium foil, etc.).
 Do not use the unit if you discover any damage to
connecting cables or other parts. Do not make
any modifications to the unit or use it for any
unintended purposes. Repairs to the unit or its
connecting leads are only to be carried out by the
manufacturer.
 If you have any questions or concerns, please
contact your dealer or the manufacturer.
 Dispose of used Powerpacks properly.
 Do not throw the Powerpacks into an open fire, as
there is a risk of explosion
TECHNI CA L DATA
Charger (accessory available from Therm-ic)
 Input: Available as model with 120V or 230V
 Output: 2 x 6V / 250 mA
FI RST US E AND CHARGI NG THE
P O WE R PA C KS
1. Important: First, connect the charger to the
socket. Plug both Powerpacks into the charger.
The switch must be in the "0" position.
10