abc home living 25700 Manuel D'instructions page 13

Press OK to validate, then button E(+) or F(-) to access Weekly Programming, it's displayed "ProG" as following:
Press button + or - to select "ON" or "OFF" to turn on or turn off the weekly program.
Press OK to validate. To exit the setting during operation, press button D(MENU).
To cancel an existing weekly program, select OFF to turn off the weekly program.
Manual Setting for Weekly Programming
Keep pressing button D(MENU) to select Mode menu.
Press OK to validate, then button E(+) or F(-) to access Manual Setting, it's displayed "MANU" as following:
Press button E(+) or F(-) to select the day(s) of program activation or inactivation. Press + or – to select the activation
day first, press OK to validate; then press + or – to select the inactivation day, press OK to validate.
Following example for selecting Monday as activation day and Sunday as inactivation day.
Press button E(+) or F(-) to select the heating level. H for high heating and L for low heating. Press Ok to validate.
Press button E(+) or F(-) to set your desired temperature. Press OK to validate.
Press button E(+) or F(-) to set the hour of the activation time. Press OK to validate.
Press button E(+) or F(-) to set the minutes of the activation time. Press OK to validate.
Please note the minute setting is accumulated by 5 minutes each time.
Press button E(+) or F(-) to set the duration of the time period. Press OK to validate.
Please note the duration time setting is accumulated by 30 minutes each time.
Press button E(+) or F(-) to select the duration of time(hour). Press OK to validate.
GB5
time period of program is completed. It's displayed "CON" (confirm).
st
Till now 1
NOTE: The program cannot run into the next day. The maximum duration can therefore not exceed midnight (for
example, if the start time is 20:30, the maximum duration displayed is 4 hours and the real maximum duration is 3
hours 30 minutes).