Sony DSR-40 Mode D'emploi page 53

Menu options
NEXT MODE FROM STILL
a)
H PHASE COARSE
H PHASE FINE a)
SC 0/180 a)
a)
SC PHASE
PB COMPONENT Y LEVEL
PB COMPONENT B–Y LEVEL
PB COMPONENT R–Y LEVEL
a)
COMPOSITE B–Y GAIN
a)
COMPOSITE R–Y GAIN
AUDIO MIX BALANCE
AUDIO MODE
JOG WITH SOUND
HOURS METER
CLOCK SET
a) The z mark appears on the monitor screen when the value is set to "0."
b) Adjust the value with the J/j buttons.
Set this option to Description of settings
STEP FWD • To advance the tape one frame after elapsing the set time of STILL
TIMER during still mode.
STB OFF • To turn the unit to standby-off mode from still mode after elapsing the
set time of STILL TIMER.
— For rough adjustment of sync phase.
— For fine adjustment of sync phase.
0DEG For rough adjustment of subcarrier phase.
180DEG
— For fine adjustment of subcarrier phase.
a)
— Adjusts Y signal level of the component signal in the playback mode.
a) — Adjusts B–Y signal level of the component signal in the playback mode.
a) — Adjusts R–Y signal level of the component signal in the playback mode.
— Adjusts B–Y signal gain level of the composite signal in the playback mode.
— Adjusts R–Y signal gain level of the composite signal in the playback mode.
— If you set the AUDIO MONITOR selector to MIX, you can select the
precise balance between channels 1/2 and channels 3/4 by five steps.
Fs48k • To set the audio mode to 2-channel mode (16bit mode). This mode
uses the whole audio area to record one stereo track. You can get
higher sound quality.
Fs32k • To set the audio mode to 4-channel mode (12bit mode). This mode
separates the audio area into 2 parts. You can record two kinds of
audio, stereo 1 and stereo 2. When recording on this VCR, audio
signals are recorded only in channels 1/2.
ON • To listen to the sound when playing a tape at various speeds.
OFF
• To turn off the sound when playing a tape at various speeds.
The digital hours meter keeps cumulative counts of the head drum
rotation time and the number of unthreading operations. These counts
can be displayed on the monitor screen and are unresettable.
• The cumulative total hours of drum rotation with tape threaded is
DRUM
displayed in 10-hour increments.
ROTATION
• The cumulative number of tape unthreading operation is displayed in
THREADING
10-operation increments.
—
Set the clock on this VCR so that the recording time can be written into
the index signal.
Using ˘/≥ and SET buttons, set the date and time.
b)
b)
b)
b)
Chapter 5 Menu Settings
b)
b)
b)
b)
b)
53 GB