uebe cyclotest baby Mode D'emploi page 53

Operating the unit
cyclotest® baby has a time window of four hours and can store your
measurements even if you measure up to two hours before or two
hours after the time initially established. If you measure outside these
four hours, the measurement is not stored and the following display
appears:
Fig. no. 4
Please be patient during the measurement. The sensor must warm up
first (from room temperature to body temperature).
If you break off the measurement too early, the unit will alert you with
3 short beeps that it was unable to store a measurement result because
the warm-up phase was not completed. In this case, please measure
again and remove the sensor only when you have heard a long beep.
cyclotest® baby takes care of everything else in the background.
EN-53