Gallagher B20 Notice D'installation page 9

Gallagher 3E0709 B20 B35 B45 User Manual
To change the battery save mode (B45)
This energizer has been preset to night save mode.
1. Open the energizer lid and disconnect the ba ery.
2. Disconnect the lid from the energizer.
3. Remove the module holder from the lid
by using a screw driver to dislocate the
locking lugs and pulling upwards.
Pulse se ng switches
Portable fence
1
8
2
1 Energizer
2 Earth stake
3 Reel
4
3
9
4 Polywire/Turbo Wire
5 Treadin Post
6 Insul-grip
4. Adjust the pulse se ng switches to
suit your requirement, then replace the
module holder in the lid, reconnect the
ba ery and test. The pulse dura on
should now be in the new mode. Pulse
me increases when in Day save, Night
save and Maximum save modes.
ON EDG
Standard
1 2 3
ON EDG
Day Save
1 2 3
5 6
7 Pigtail post
8 Earth (Green)
9 Live (Red)
ON EDG
Night Save
1 2 3
ON EDG
Maximum Save
1 2 3
7
9