Dörr Ultra 48 LED Notice D'utilisation page 12

Camera Settings
White Balance: Set your camera to auto white balance mode (AWB). If a more accurate setting is required you can do a manual
•
white balance metering (PRE).
Exposure: For macro and close-up shots we recommend to select the aperture manually in order to keep control of the depth
•
of focus. Adjust the shutter speed manually (M) or with aperture-priority mode (A).
Focus: We recommend manual focus adjustment for close-up and macro shots.
•
Note: In order to avoid blurred images, we recommend the use of a tripod.
CLEANING AND STORAGE
Never use aggressive cleansing agents or benzine to clean the device. We recommend a soft microfi ber cloth to clean the outer
parts of the device. Make sure to take the device o power before cleaning. Store the device in a dust-free, dry and cool place.
This device is not a toy – keep it out of reach of children. Keep away from pets.
SPECIFICATIONS
Colour temperature: approx. 5500 K - 6500 K (daylight)
Light intensity: approx. 130 Lux/1m with 48 LEDs, approx. 84 Lux/1m with 24 LEDs
Power source: AC/DC adapter DC 3V 1.5A (inclusive) or alternatively:
2 Mignon AA batteries or rechargeable batteries of the same type (not included)
approx. 90 minutes with 1 set of fresh batteries, depending on type
Operation time:
Recommended distance: approx. 3 cm to 100 cm
Connection: Supplied with adapter rings for 49, 52, 55, 58, 62, 67 mm lens mount
Measurements: Control Unit: approx. 91 x 45 x 44 mm
LED Ring Light: approx. 134 x 103 x 28 mm
Weight: approx. 180 g (w/o batteries)
CONTENT
1x LED ring light
1x control unit
1x AC Adapter
each 1x adapter ring 49, 52, 55, 58, 62, 67 mm
1x Instruction manual
12