Murray EQ675iS Mode D'emploi page 9

Table des Matières

Publicité

Operating instructions – Lawn mower with IC engine
Therefore use original spare parts
and original accessories only or
spare parts and accessories
authorised by the manufacturer.
All repair work must be conducted
exclusively at a specialised garage.
When working with the
appliance
When working with or on the
appliance you must wear protective
clothing. This includes:
– safety shoes,
– trousers,
– close-fitting garments,
– hearing protection,
– protective goggles, etc.
All safety devices must be installed
on the appliance, and they must be
complete and in a fully functional
condition.
Do not make any changes to the
safety devices.
Operate the vehicle only when it
is in good technical condition as
stipulated and delivered by the
manufacturer.
Never change the engine settings
preset at the factory.
Keep away from naked flames,
avoid creating sparks and do not
smoke.
Before all work on this
appliance
If the lawn mower has an engine,
always turn off it off before doing
any working on it (e.g. repair work
and adjustments) and before
transporting it (e.g. lifting or
carrying) in order to avoid injury
– switch OFF the engine,
– remove the ignition key (if used),
– wait until all moving parts have
come to a complete stop and the
engine has cooled down,
– remove the spark plug connector
on the engine in order to prevent
the engine from accidentally
being started,
– remove the starter battery from
the engine,
– which takes into account
additional safety information
in the engine manual.
After working with the appliance
Never leave the unit without
switching off the engine and –
if used – without removing the
ignition key.
Safety devices
Fig. 1
Danger
!
Never use a lawn mower if it has
damaged safety devices or if there
are no safety devices fitted.
Safety lever (1)
The safety lever stops the motor
and cutting blades in an
emergency.
There must be no attempt to
circumvent this function, which is
crucial for your personal safety.
Ejection flap (2) or impact
protection (3)
The ejection flap/impact protection
protects you from being injured by
the blade or by ejected solid
objects. The lawn mower must
always be operated with the
ejection flap or impact protection.
Symbols on the appliance
On the appliance you will find
various symbols on adhesive
labels. These symbols are
explained in the following:
Attention! Before
starting up the unit,
!
read the operating
instructions!
Keep third parties
away from the danger
area!
Switch off the engine
and remove the
ignition key before
carrying out any work
on the unit and before
leaving the unit.
Please follow
additional information
in the section entitled
"For your safety".
Before working on the
cutters, remove the
spark-plug terminal!
Keep fingers and feet
away from the cutting
tools! Switch off the
lawn-mower and
remove the spark
plug connector before
adjusting, cleaning, or
checking it.
Risk of injury – only work with
impact protection mounted.
Risk of injury – only work with tail
clamp mounted.
Risk of injury – only work with
deflector mounted.
Always keep these symbols on
the appliance in a legible state.
English
5

Publicité

Table des Matières
loading

Table des Matières