Setting The Clock Automatically - Sony XR-CA600X Mode D'emploi

1
Press (DISPLAY/PTY) or (PTY/DSPL)
during FM reception until "PTY"
appears.
The current programme type name appears if
the station is transmitting the PTY data.
"- - - - - - - -" appears if the received station is
not an RDS station, or if the RDS data is not
received.
2
Press (DISC/PRESET) or (PRESET)
repeatedly until the desired
programme type appears.
The programme types appear in the order
shown in the table.
"- - - - - - - -" appears if the programme type
is not specified in the RDS data.
3
Press (ENTER).
The unit starts searching for a station
broadcasting the selected programme type.
Setting the clock
automatically
— CT
The CT (Clock Time) data from the RDS
transmission sets the clock automatically.
1
During radio reception, press (MENU),
then press either side of
(DISC/PRESET) or (PRESET) repeatedly
until "CT-OFF" appears.
2
Press the (+) side of (SEEK) repeatedly
until "CT-ON" appears.
The clock is set.
3
Press (ENTER) to return to the normal
display.
To cancel the CT function, select "CT-OFF" in
step 2.
Notes
• The CT function may not work even though an RDS
station is being received.
• There might be a difference between the time set by
the CT function and the actual time.
15