Rear Spacer; Fitting The Door Handle - AEG SANTO 72398-6 KA Notice D'utilisation

Rear spacers
Fit the rear spacers contained in
the appliance to ensure escape of
heat generated during operation.
Proceed
illustrated in figures.

Fitting the Door Handle

1. Screw the top handle
bracket to the handle rod
(1). Fit the bottom handle
bracket on the lower left-
hand side of the door (2).
2. Fit the top handle bracket
on the top left-hand side
of the door (3) and screw
the handle rod to the
bottom handle bracket (4).
Attention!
Do not overtighten the
screws (max. 2 Nm) as you
may damage the door
handles.
8
in the sequence