Listening To The Radio - Hitachi UR 18DSL2 Instructions De Sécurité Et Mode D'emploi

English
○ The radio has no charging function. Using the AC
adapter and rechargeable battery simultaneously
will not charge the battery.
If is displayed when you turn the power on
with the rechargeable battery inserted, the battery
power is low.
Power the radio from the AC adapter or insert a
charged battery.
Loading a plug-in battery (Fig. 4)
Insert the battery into the space in the radio body as
far as it will go before securing with the belt.
If the belt is not the right length, adjust the length of
the belt.
Plug-in
battery
Loading a slide battery (Fig. 5)
Remove the slide terminal cover.
Match the battery with the grooves in the radio body
and insert the battery as far as it will go.
Slide
battery
Slide terminal
Terminal
cover
Adjusting the Clock
Adjust the clock with the power turned off .
1. Press and hold the sleep timer/clock button for
more than 2 seconds. The "hour" indicator blinks.
Pressing the band selector button in this state
switches between the 12-hour display and 24-
hour display.
2. Turn the select dial or press the search button to
select the "hour".
3. Press the sleep timer/clock button again. The
"minutes" indicator blinks.
4. Turn the select dial or press the search button to
select the "minutes".
14
Belt
Fig. 4
Slide terminal
cover
Back door
Fig. 5
5. Press the sleep timer/clock button again to save
the clock setting.
NOTE
To save the clock setting, the backup batteries must
be installed.

LISTENING TO THE RADIO

CAUTION
Turn down the volume before pressing the
power button.
Failure to do so may result in sudden loud
noise and cause damage to the speakers or
lead to hearing impairment.
1. Press the power button to turn on the radio.
2. Press the band select button and select the radio
band (FM or AM).
NOTE
The display changes in the order of
[FM→AM→AUX→FM] each time the band select
button is pressed.
3. Select a station using Auto, Manual or Save
(Memory).
4. If noise occurs or reception is poor, refer to "For
Better Reception".
5. Turn the volume dial to adjust the volume.
6. Press the power button to turn off the radio.
Auto Select
Press the or search button to automatically
search for stations with strong radio waves.
When a station is detected, the radio plays for 3
seconds.
Press the search button before the next search starts
to continue listening to the detected radio station.
Manual Select
Turn the select dial to fi nd the station you want to
listen to.
Save (Memory)
Find the station that you want to save.
Press and hold down the memory button (1 to 5) for
more than 2 seconds to save the setting.
The MEMORY indicator appears at the bottom left
of the display panel and the number of the assigned
memory button is displayed below that.
You can save 5 AM and 5 FM stations in the memory
buttons 1 to 5.
To select the saved station, press the memory button
corresponding to the saved number.