Troubleshooting List - B.Braun Vet Care FAV4 Mode D'emploi

7.

Troubleshooting list

Malfunction
Shearing head not mov-
ing
Clipper FAV5 cutting
poorly or not at all
Motor of Clipper FAV5
not running
Motor of Clipper FAV5
running very slowly
Finding
Shearing head jammed
Clipper FAV5 not cutting Cutting edges of shearing
Cutting performance
insufficient
Overheating of shearing
head
Shearing head jammed
Clipper FAV5 not cutting Debris on electric con-
Smell of burning from
the machine housing
Shearing head jammed
Atypical motor noises
Cause
Shearing head not prop-
erly engaged in its seat-
ing
Rocker arm defective
head blunted
Animal hair too wet
Shearing head lacking
shearing pressure
Cutting edges of cutting
head not honed correctly
Lack of lubrication of
shearing head edges
Animal hair jammed in
shearing head
tacts
Motor/Electronics defec-
tive
Motor burnt
Debris in shearing head
Lack of lubrication of
shearing head edges
Remedy
Properly engage the shear-
ing head, see Chapter
Attaching the shearing
head
Replace rocker arm
Have product repaired by
the manufacturer
Only cut dry animal hair
Have product repaired by
the manufacturer
Have product repaired by
the manufacturer
Lubricate cutting edges of
shearing head, see Chapter
Lubricating the shearing
head
Demount shearing head and
remove animal hair
Switch off Clipper FAV5 and
clean the contacts
Have product repaired by
the manufacturer
Have product repaired by
the manufacturer
Clean and lubricate the
shearing head, see Chapter
Lubricating the shearing
head
Lubricate cutting edges of
shearing head, see Chapter
Lubricating the shearing
head
9