Hama HOME X10CD Mode D'emploi page 10

g
4.2 Notes on use
4.2.1 Switching on the device
■ Slide the operating switch (1) to the "On/Auto" position. The green
"Ready" LED (4) illuminates continuously and the cutting rollers
switch on brieGy. The device is ready for use.
4.2.2 Shred paper and plastic cards in the paper feed
shaft
■ Insert the paper or the plastic card into the centre of the feed shaft
(2). The cutting rollers are switched on automatically.
■ Let go of the paper or plastic card. The device switches back to
standby mode after shredding is completed.
4.2.3 Shredding CDs, DVDs, and BluRay discs
■ Slide the operating switch (1) to the "Rev/On CD" position. The
cutting rollers begin turning continuously and the device is ready
for cutting CDs, DVDs, or BluRay discs.
■ Insert the CD, DVD or BluRay disc into the centre of the feed shaft
(3).
■ Let go of the CD, DVD or BluRay disc. After shredding is comple-
te, slide the operating switch (1) to the "OFF" position in order to
switch the device off, or slide it to "On/Auto" to switch to standby
mode for paper and plastic card shredding.
10 Home X10CD