Sony HVL-F36AM Mode D'emploi page 32

3
Remove the flash from the camera and raise the built-
in flash.
• When the flash is removed from the camera, the high-speed-sync
lamp comes on.
4
Set up the camera and flash.
• Set up the camera and flash in a dark location, such as indoors.
• See page 28 for details.
5
Make sure that the built-in flash and flash are fully
charged.
• is lit in the viewfinder when the built-in flash is fully charged.
• The AF illuminator on the front blinks, and
the flash is fully charged.
32
on the rear is lit, when