Bosch PDA 240 E Notice Originale page 17

Noise/Vibration Information
Measured values
EN 60745.
Typically the A-weighted sound pressure level of
the product is 80 dB(A). Uncertainty K=3 dB.
The noise level when working can exceed
80 dB(A).
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
2
K =1.5 m/s .
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Bosch Power Tools
determined according
2
=6 m/s , Uncertainty
h
Assembly
Before any work on the machine itself, pull
to
the mains plug.
Dust/Chip Extraction
Dusts from materials such as lead-containing
coatings, some wood types, minerals and metal
can be harmful to one's health. Touching or
breathing-in the dusts can cause allergic reac-
tions and/or lead to respiratory infections of the
user or bystanders.
Certain dusts, such as oak or beech dust, are
considered as carcinogenic, especially in connec-
tion with wood-treatment additives (chromate,
wood preservative). Materials containing asbes-
tos may only be worked by specialists.
– Use dust extraction whenever possible.
– Provide for good ventilation of the working
place.
– It is recommended to wear a P2 filter-class
respirator.
Observe the relevant regulations in your country
for the materials to be worked.
External Dust Extraction
You can either attach a vacuum hose or a Bosch
all-purpose vac with remote starting control to
the vacuum connection 1.
Connecting a Ø 35 mm vacuum hose:
– Attach a suitable adapter to the vacuum con-
nection 1.
– Connect the adapter with the vacuum hose
( Ø 35 mm) of a vacuum cleaner.
Connecting a Ø 19 mm vacuum hose:
– Firmly attach the vacuum hose ( Ø 19 mm) to
the vacuum connection 1.
– Attach a suitable adapter to the vacuum hose
and connect to a vacuum cleaner.
The vacuum cleaner must be suitable for the ma-
terial being worked.
When vacuuming dry dust that is especially detri-
mental to health or carcinogenic, use a special
vacuum cleaner.
English | 17
1 609 929 M19 | (20.8.07)