sanowell Life TENS Mode D'emploi page 26

5.2. Control elements and their function
5.2.1. Setting into operation
For setting your sanowell Life Tens into operation turn the intensity dial clockwise
until you hear a „click" sound. By turning counter clockwise you can turn off the
device.
5.2.2. Setting the pulse width
All pulse width-adjustments are made via the left turning knob (pulse width). The
pulse width can be continuously adjusted from 30 to 260 µs.
Recommended setting: 200 µs
Function of pulse width is explained in chapter 4.1.
5.2.3. Setting impulse frequency
All pulse frequency-adjustments are made via the right turning knob (pulse rate).
The pulse frequency can be continuously adjusted from 2 to 150 Hz.
Recommended setting: 100 Hz
Function of impulse frequency can be read in chapter 4.2.
5.2.4. Setting intensity
Intensity is set by turning the intensity dials. Turning clockwise increases, turning
counter clockwise decreases intensity steadily. Always start with the lowest intensity
setting and work your way up slowly until you feel a tingling sensation. Treatment
never ought to be uncomfortable or even painful.
The function of intensity is described in chapter 4.3.
5.2.5. Setting treatment duration
With the help of the lower slide control (timer min) you can choose between three
treatment durations: C for the continuous mode, 30 or 60 minutes.
Recommended treatment duration: 30 minutes
The function of treatment duration can be read in chapter 4.4.
26