Remote Control Unit Operations During Multi-Source Playback - Denon AVR-1706 Mode D'emploi

Advanced Operation
ZONE2 OFF
INPUT
SELECTOR
MODE 1
Remote control unit operations during
multi-source playback (selecting the source)
This is only possible when the main unit in the ZONE2 mode
( page 43).
1
MODE 1
Set the switch to the "AUDIO".
2
MODE 2
Set the switch to the "ZONE2".
3
ZONE2 ON
Press the button.
To cancel the ZONE2 mode:
Press the ZONE2 OFF button.
4
INPUT SELECTOR
Press the button.
The ZONE2 source switches directly.
5
The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
ZONE2 ON
VOLUME
Default setting (ZONE2 VOLUME LEVEL):
– – – dB (MINIMUM)
CHANNEL
6
When the ZONE2 SOURCE function is set to
TUNER, the preset channel can be selected
MODE 2 pressing the
control unit.
VOLUME
button on the remote control unit.
CHANNEL
button on the remote
36
ENGLISH
ENGLISH
Advanced Operation