AEG DK 3160 Notice D'utilisation page 72

• Depending on hood version:
Extractor Version:
Fix an exhaust duct with the right diameter to the exhaust outlet of
the hood and connect to an exhaust system ducted to the outside
(for fixture and connection of exhaust duct, utilize the most suitable
system for the duct purchased). Fig 14
Filter Version:
Install the filter connection F on the collar B and secure with 1
screw. Fig 15
• Connect the hood to the power supply!
Ø 150
Fig. 14
• Fix the telescopic flue tot he support with two screws. Fig 16
2 x Ø 3x9
Fig. 16
72
*
Ø 120-125
*
H
Fig. 15
2 x Ø 3x9
H
F
*
B
F
*
1 x Ø 2,9x13