Settings - Inanny N20 Guide De L'utilisateur

Operation with the mains part
Connect the mains part plug on the parent unit (with batteries included)
to a socket. The device automatically switches on, and the power LED will
light up green.
If the mains part plug is unplugged the device will switch to battery
operation. The standby time will depend on the battery charge status.
To switch the device off press the
the power LED will turn off.
If there is no connection between the devices (baby unit not
switched on or out of range), an acoustic warning will sound on
the parent unit.

7. Settings

Adjusting the volume
You can adjust the volume in 5 levels on the parent unit by pressing the
or button.
The sound intensity is also shown using an LED noise level light
display so that the device can also be used by those with a
hearing impairment.
button for approx. 2 seconds, and
8