Télécharger Imprimer la page

Milwaukee 9078-20 Manuel De L'utilisateur page 6

Masquer les pouces Voir aussi pour 9078-20:

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
WARNING
To reduce the risk of injury,
always unplug the charger and
remove the battery pack from
t h e c h a r g e r o r t o o l b e f o r e
performing any maintenance.
N e v e r d i s a s s e m b l e t h e t o o l ,
battery pack or charger. Contact a
MILWAUKEE service facility for ALL
repairs.
Keep your tool, battery pack and char-
ger in good repair by adopting a regular
maintenance program. After six months
to one year, depending on use, return the
tool, battery pack and charger to a
MILWAUKEE service facility for:
Lubrication
Mechanical inspection and cleaning
(gears, spindles, bearings, housing,
etc.)
Electrical inspection (battery pack,
charger, motor)
Testing to assure proper mechanical and
electrical operation
Maintaining Tool
If the tool does not start or operate at full pow-
er with a fully charged battery pack, clean
the contacts on the battery pack. If the tool
still does not work properly, return the tool,
charger and battery pack, to a MILWAUKEE
service facility for repairs.
WARNING
To reduce the risk of personal injury
and damage, never immerse your
tool, battery pack or charger in liquid
or allow a liquid to fl ow inside them.
Cleaning
Clean dust and debris from charger and tool
vents. Keep tool handles clean, dry and free
of oil or grease. Use only mild soap and a
damp cloth to clean the tool, battery pack
and charger since certain cleaning agents
and solvents are harmful to plastics and other
insulated parts. Some of these include gaso-
line, turpentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammonia and
household detergents containing ammonia.
Never use fl ammable or combustible sol-
vents around tools.
Repairs
For repairs, return the tool, battery pack and
charger to the nearest service center listed on
the back cover of this operator's manual.
ACCESSORIES
WARNING
Always remove battery pack before
changing or removing accessories.
Only use accessories specifi cally
recommended for this tool. Others
may be hazardous.
For a complete listing of accessories refer to
your MILWAUKEE Electric Tool catalog or go
on-line to www.milwaukeetool.com. To obtain
a catalog, contact your local distributor or a
service center listed on the back cover of this
operator's manual.
10
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE electric power tool (including battery charger) is warranted to the original purchaser only
to be free from defects in material and workmanship. Subject to certain exceptions, MILWAUKEE will repair
or replace any part on a electric power tool which, after examination, is determined by MILWAUKEE to be
defective in material or workmanship for a period of fi ve (5) years* after the date of purchase. Return the
electric power tool and a copy of proof of purchase to a MILWAUKEE factory Service/Sales Support Branch
location or MILWAUKEE Authorized Service Station, freight prepaid and insured, are requested for this
warranty to be effective. This warranty does not apply to damage that MILWAUKEE determines to be from
repairs made or attempted by anyone other than MILWAUKEE authorized personnel, misuse, alterations,
abuse, normal wear and tear, lack of maintenance, or accidents.
* The warranty period for Hoists (lever, hand chain, & electric chain hoists), Ni-Cd battery packs, Work Lights
(cordless fl ashlights), Job Site Radios, and Trade Titans™ Industrial Work Carts is one (1) year from the
date of purchase.
*There is a separate warranty for Li-Ion Battery Packs that accompany the power tools:
*Every MILWAUKEE Li-Ion Battery Pack is covered by an initial 1000 Charges/2 Years free replacement
warranty. This means that for the earlier of the fi rst 1000 charges or two (2) years from the date of purchase/
fi rst charge, a replacement battery will be provided to the customer for any defective battery free of charge.
Thereafter, customers will also receive an additional warranty on a pro rata basis up to the earlier of the fi rst
2000 charges or fi ve (5) Years from the date of purchase/fi rst charge. This means that every customer gets
an additional 1000 charges or three (3) years of pro rata warranty on the Li-Ion Battery Pack depending upon
the amount of use. During this additional warranty period, the customer pays for only the useable service
received over and above the fi rst 1000 Charges/2 years, based on the date of fi rst charge and number of
charges found on the battery pack via MILWAUKEE's Service Reader. After 1000 charges/2 years from the
date of purchase/fi rst charge, the customer will be charged a prorated amount for the service rendered.
Warranty Registration is not necessary to obtain the applicable warranty on a MILWAUKEE product. However,
proof of purchase in the form of a sales receipt or other information deemed suffi cient by MILWAUKEE, is
requested.
ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN IS
A CONDITION OF THE CONTRACT FOR THE PURCHASE OF EVERY MILWAUKEE PRODUCT. IF YOU
DO NOT AGREE TO THIS CONDITION, YOU SHOULD NOT PURCHASE THE PRODUCT. IN NO EVENT
SHALL MILWAUKEE BE LIABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE
DAMAGES, OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED TO
BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY PRODUCT INCLUD-
ING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS. THIS WARRANTY IS EXCLUSIVE
AND IN LIEU OF ALL OTHER WARRANTIES OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR
IMPLIED. WITHOUT LIMITING THE GENERALITY OF THE FOREGOING, MILWAUKEE DISCLAIMS ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE,
AND ALL OTHER WARRANTIES.
This warranty applies to product sold in the U.S.A., Canada and Mexico only.
Please consult MILWAUKEE's website www.milwaukeetool.com or call 1.800.SAWDUST (1.800.729.3878)
to locate your nearest service facility for warranty and non-warranty service on a MILWAUKEE electric power
tool.
11

Publicité

loading

Ce manuel est également adapté pour:

9098-23