König SAS-DUMMYCAM50 Mode D'emploi page 2

Introduction:
CCTV dummy dome camera. Professional design for the image of security. With built-in
flashing LED.
• We recommend you read this manual before installing/using this product.
• Keep this manual in a safe place for future reference.
Packaging content:
• CCTV dummy camera
• Mounting screws and plugs
• Manual
Specifications:
Housing:
IP protection:
Battery:
Dimensions:
Weight:
Insert the batteries to activate the flashing LED:
1. Remove the battery compartment at the
backside of the camera.
2. Insert 2x AA 1.5 V battery into the battery
compartment and correctly match the
polarity markings (+ and -), to activate the
flashing LED.
Close the battery compartment after
inserting the batteries.
plastic
indoor use
2x 1.5 V AA battery (not included)
73 x 118 mm
142 g (without batteries)
2
ENGLISH