Waeco SinePower MSP 162 Notice D'emploi page 24

_MSP160_MSP350.book Seite 24 Montag, 5. November 2007 4:49 16
Technical description
Note
I
Note when connecting devices with an electrical drive (such as
power drills and refrigerators), that they often need more power
than is stated on the type plate.
If the system is overloaded or has a short circuit, the device switches off. If
the input voltage is too high or too low or the system overheats, the device
switches off and then on again after a short while.
The plugs of the MSP 162 and MSP 164 inverters can be inserted in the
socket (fig. 2 1, page 4) for storage.
The inverter has the following connections, displays and control elements:
Pos. in
fig. 1, Element
page 3
1 Switches
0 / Off: device is switched off
I / On: device is switched on
II / Remote: device is switched on and off with an external switch
2 Status LED
3 230 V AC safety socket
4 Holders
5 DC connection cable
Pos. in
fig. 2, Element
page 4
1 Socket (MSP 162 and MSP 164 only) for storing the DC connector.
2 Earth terminal
3 DC connection cable
4 Remote port for connecting to an external switch for switching the device on
and off
5 Fan (MSP 352 and MSP 354 only)
24
SinePower