Cleaning And Maintenance - Teesa TSA3546 Manuel D'utilisation

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

Owner's manual

• Clean all the parts that will come in the contact with food prior to first use of the device!

• Disconnect from the power supply socket before disassembling and cleaning.

• The motor unit, the power cable and the mains plug must not be immersed in water or

any other liquid. Wipe the motor unit with soft, slightly damp cloth only.

• Do not use any sharp or abrasive cleaning agents.

• NOTE: clean the device as soon as possible after each use. Avoid the residues to dry on the

surfaces of the device. Rinse the jar, lid, blade assembly and measuring cup as pre-cleaning.

• After processing very salty food or coloring food, it is suggested to rise the blades right away.

• Lid, blade assembly and measuring cup can be washed in warm soapy water. Rinse and

dry thoroughly.

• Jar can also be cleaned with warm soapy water but do so carefully. It has a safety switch

located in the handle, so pay special attention not to soak nor wet the handle. It is advised

to use a soft, damp cloth to clean the handle.

• Lid and blades may be washed in the dishwasher, on the top shelf. When cleaning in a

dishwasher, be careful not to overdose cleaner or decalcifier.

• In case of blades, user can clean them in the dishwasher only if the set temperature is

below 50°C, and drying function is turned off!

• When processing food with color, the plastic parts of the appliance may discolor. Wipe

these parts with vegetable oil, then clean them the usual way.

• For fast cleaning in between preparation of different food, blender can be cleaned without

disassembling: pour warm water with few drops of washing liquid into the blender jar.

Close the cover. Fit it on the motor unit and give a few pulses. Remove the blender, rinse

the jug under running water and leave it upside down to dry.

• WARNING: Be careful when handling the blades as they are extremely sharp!

• In case of stubborn stains use a little detergent and wipe over.

• Dry all parts carefully before reassembling the device and storing it.

• Keep the device out of the reach of children, even when storing.

• Store the device in cool, dry place. It is suggested to store the device disassembled. Do not

store the blender with the jar on the motor unit.

If your device fails to function as required, please try this table first

Problem

The motor doesn't start

or blade doesn't rotate