Teesa TSA3546 Manuel D'utilisation page 22

22
IMPORTANT: Before assembly, make sure the speed rotation knob is in OFF position. Plug
the device into power mains only AFTER the device has been completely and correctly
assembled.
1. Place the motor unit onto a level, dry, smooth, waterproof worktop.
2. Mount the blade unit gasket on the blade assembly (the gasket
should be placed around the rim under the blades).
EN
4. Place the jar on the motor unit (jar's handle should be above
open padlock symbol) and turn it clockwise, until it locks
in place (the handle should now be above closed padlock
symbol).
ASSEMBLY
3. Mount the blade assembly in the jar – place the jar over the
blade assembly and turn the blade assembly clockwise until
locked (as indicated on the bottom of the blade unit).
5. Place the lid on the jar and turn clockwise until it locks into
place. Place the measuring cup on the jar and rotate until it
locks into place.
Owner's manual