Rear Panel; Installing The Dedicated Software; Installing The Ios Settings Panel; Installing The Windows Driver - Tascam iXR Mode D'emploi

Rear panel

w Kensington Security Slot
e PC/MAC/POWER port (USB B-type)
When using this unit with an iOS device, use the
included USB cable to connect the USB power
adapter included with the iOS device. Doing this
allows this port to function as a power supply
connector.
When using this unit with a computer, use
the included USB cable to connect it to the
computer.
port (USB-A type)
r
To connect this unit with an iOS device, use
the Lightning-USB cable included with the iOS
device.
NOTE
This port will not provide power to the iOS
device, nor will it draw power from the device.

Installing the dedicated software

To use this unit with a computer, dedicated software
must be installed on the computer.
With some exceptions, the latest software for the
operating system you are using can be downloaded
from the TEAC Global Site (http://teac-global.com/).
• To use this unit with an iOS device, install the
Settings Panel app. The standard iOS driver
will be used. The Settings Panel app can be
downloaded for free from the App Store.
•
To use this unit with a Windows computer,
install the driver. When you install the driver, the
Settings Panel application will be installed at the
same time.
•
To use this unit with a Mac, install the Settings
Panel application. The standard OS driver will
be used.
CAUTION
Before starting to install software, quit other
applications.

Installing the iOS Settings Panel

Find the TASCAM iXR Settings Panel app on the App
Store and download it.
Downloading it will install it automatically.
t PHANTOM switch
Use this switch to provide +48V phantom power
to the IN 1/IN 2 jacks.
y MIDI OUT connector
This 5-pin DIN is a standard MIDI output jack.
It outputs MIDI signals.
u MIDI IN connector
This 5-pin DIN is a standard MIDI input jack.
Use it to input MIDI signals.
i LINE OUT 1/L and 2/R jacks
These standard TRS jacks are analog line outputs.
Use the Settings Panel to set the signals output
from the LINE OUT 1/L and 2/R jacks.
(Tip: HOT, Ring: COLD, Sleeve: GND)

Installing the Windows driver

CAUTION
• Complete installation of the driver on the
computer before connecting the unit to it with
the USB cable.
• If you already connected the unit to the
computer using the USB cable before installing
the driver and the Found New Hardware Wizard
launched, close the message and disconnect the
USB cable.
8 Windows driver installation procedures
1. Download the latest Windows driver for the
operating system you are using from the TEAC
Global Site (http://teac-global.com/) and save it
on the computer to be used with the unit.
2. Open the saved Windows driver (zip file) on, for
example, the computer desktop.
3. Double-click the "iXR_Installer_XXX.exe" (XXX
is the version number), file in the folder that
appears after uncompression to automatically
launch the installation software.
4. When a "Security Warning" or "User Account
Control" screens appear, click the "Yes" button.
7
TASCAM iXR