Analog Audio Output Ratings; Control Input/Output Ratings; Audio Performance; Operation Requirements - Tascam iXR Mode D'emploi

Analog audio output ratings

8 Line outputs (balanced, LINE OUT 1/L–2/R)
Connector: 6.3mm (1/4") standard TRS jack (Tip:
HOT, Ring: COLD, Sleeve: GND)
Output impedance: 110 Ω
Rated output level: +4 dBu (1.273 Vrms)
Maximum output level: +20 dBu (7.75 Vrms)
8 Headphone output (PHONES)
Connector: 3.5mm (1/8") stereo mini jack
Maximum output: 18 mW + 18 mW or higher
(THD+N 1% or less, into 32Ω load)

Control input/output ratings

8 MIDI IN connector
Connector: 5-pin DIN
Format: standard MIDI
8 MIDI OUT connector
Connector: 5-pin DIN
Format: standard MIDI
8 Windows/Mac/Power port
Connector: 4-pin USB B-type
Transfer rate: USB 2.0 High Speed (480 Mbps)
port
8
Connector: USB A-type
Transfer rate: USB 2.0 High Speed (480 Mbps)

Audio performance

8 Mic amp EIN (equivalent input noise)
−125 dBu or less (150Ω termination, gain knob
at MAX)
8 Frequency response
IN 1/IN 2 to LINE OUT (BALANCED), headphone
(PHONES) output
At 44.1/48 kHz
20 Hz: +0 dB/−0.4 dB (JEITA)
20 kHz: +0 dB/−0.1 dB (JEITA)
20 kHz: +0 dB/−0.5 dB (HP output, JEITA)
At 88.2/96 kHz
20 Hz: +0 dB/−0.4 dB (JEITA)
40 kHz: +0 dB/−0.25 dB (JEITA)
40 kHz: +0 dB/−2.0 dB (HP output, JEITA)
8 S/N ratio
101 dB or higher (MIC/LINE input to LINE OUT,
gain knob at MIN, JEITA)
14
TASCAM iXR
8 Distortion
0.0025% or less (MIC/LINE input to LINE OUT,
1kHz sine wave, at nominal input level and
maximum output level, JEITA)
8 Crosstalk
95 dB or more (MIC/LINE input to LINE OUT, 1
kHz, JEITA)

Operation requirements

Check the TEAC Global Site (http://teac-global.com/)
for the latest information about supported operating
systems.

iOS devices

Apple iOS devices with a Lightning connector and
running iOS 8, 9 or later

Windows

8 Supported operating systems
Windows 10 32-bit
Windows 10 64-bit
Windows 8.1 32-bit
Windows 8.1 64-bit
Windows 7 32-bit SP1 or later
Windows 7 64-bit SP1 or later
(Windows Vista and Windows XP are not
supported)
8 Computer hardware requirements
Windows-compatible computer with a USB 2.0
port
8 CPU/processor speed
2 GHz or faster dual core processor (x86)
8 Memory
2 GB or more
CAUTION
Operation of this unit was confirmed using
standard computers that meet the above
requirements. This does not guarantee
operation with all computers that meet the
above requirements. Even computers that meet
the same system requirements might have
processing capabilities that differ according to
their settings and other operating conditions