Shutdown And Startup Problems - Fujitsu LIFEBOOK S751 Mode D'emploi

Masquer les pouces Voir aussi pour LIFEBOOK S751:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Problem
The batteries seem to
discharge too quickly.

Shutdown and Startup Problems

The Suspend/Resume
button does not work.
The system powers up, and
displays power on informa-
tion, but fails to load the
operating system.
Your system display won't
turn on when the system is
turned on or has resumed.
Error message is displayed
on the screen during the
notebook (boot) sequence.
Possible Cause
Possible Solutions
The power savings fea-
Check the Power Options menu settings and adjust according to
tures may be disabled.
your operating needs.
You are running an
Use both the primary battery and an optional second battery
application that uses a
and/or use a power adapter for this application when at all
lot of power due to fre-
possible.
quent drive or wireless
access.
The brightness is turned
Turn down the brightness adjustment. The higher the brightness
all the way up.
the more power your display uses.
The batteries are old.
Replace the batteries.
Battery was exposed to
Replace the batteries.
high temperatures.
The batteries are too
Restore the notebook to normal operating temperature. Charging
hot or too cold.
icon on the Status Indicator panel will flash when battery is outside
of operating range.
There may be a
Close all applications and try the button again.
software conflict
You have a secured
Make sure you have the right password. Enter the setup utility and
system requiring a
verify the Security settings and modify them as accordingly. See
password.
"BIOS Setup Utility" on page 48.
Internal hard drive was
Use the BIOS setup utility or Primary Master submenu, located
not detected.
within the Main menu, to try to auto detect the internal hard drive.
You have installed the
Check the Status Indicator Panel for presence of the Security
LIFEBOOK/Security
icon. If it is visible, enter your password See "Status Indicator
Application panel.
Panel" on page 23.
Power On Self Test
See the POST messages to determine the meaning and severity
(POST) has detected a
of the problem. Not all messages are errors; some are simply sta-
problem.
tus indicators. See "Power On Self Test Messages" on page 94.
91

Publicité

Chapitres

Table des Matières
loading

Table des Matières