Displayport; E-Sata / Usb 2.0 Port; Port Replicator Connector - Fujitsu LIFEBOOK S751 Mode D'emploi

DisplayPort

The DisplayPort connector, located on the left side of
the system, allows you to connect DisplayPort devices
to your notebook. In order to connect a DisplayPort
device, follow these easy steps:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated..

E-SATA / USB 2.0 Port

E-SATA (External Serial Advanced Technology
Attachment) is an external version of SATA, which
connects your computer to the hard drive. E-SATA is
ideal for backing up large files on an external hard drive.
The port can also be used as a USB 2.0 port.
To connect an E-SATA or USB 2.0 device:
1
Align the connector with the port opening.
2
Push the connector into the port until it is seated.

Port Replicator Connector

The port replicator connector is used for the connection of your notebook to an optional port replicator. In
order to connect your notebook to this device, follow the instructions in "Port Replicator" on page 79.
Figure 28. DisplayPort Connection
78
Figure 29. E-SATA Connection