Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Problem
The display does not close.
The display has bright or
dark spots.
The display is dark when on
battery power.
You have connected an
external monitor and it
does not display any
information.
You have connected an
external monitor and it does
not come on.
Miscellaneous Problems
Error message is displayed
on the screen during the
operation of an application.
Possible Cause
Possible Solutions
A foreign object, such
Remove all foreign objects from the keyboard.
as a paper clip, is stuck
between the display
and keyboard.
If the spots are very tiny
This is normal; do nothing.
and few in number, this
is normal for a large
LCD display.
If the spots are numer-
Display is faulty; contact your support representative.
ous or large enough to
interfere with your oper-
ation needs.
Power Management
Press [Fn] + [F7] to increase brightness or double-click on the bat-
utility default is set on
tery gauge and adjust Power Control under battery settings.
low to conserve power.
Your external monitor is
Reinstall your device. See "External Video Port" on page 77.
not properly installed.
Your operating system
Check your device and operating system documentation and acti-
is not setup with the
vate the proper driver.
correct software driver.
Your external monitor is
See your monitor documentation and the External Monitor Sup-
not compatible with
port portions of the Specifications section. See "Specifications" on
your notebook.
page 115.
Application software
See your application manual and help displays screens for more
often has its own set of
information. Not all messages are errors some may simply be sta-
error message displays.
tus.
93
Publicité
Chapitres
Table des Matières
Dépannage
