Creating Backup Images Of Factory Image, Dar, And Discs - Fujitsu LIFEBOOK S751 Mode D'emploi

Creating Backup Images of Factory Image, DAR, and Discs

S
OME CONFIGURATIONS OF CERTAIN
,
RATHER THEY ARE LOADED ON THE
PROCEDURES
Using the [Manage/Change] button, you can create backup images of the Factory Image, DAR,
Application Disc, or Bootable Disc.
1
Launch My Recovery from the desktop icon.
2
Select [Manage/Create] -> [Backup Images]
The Backup Images menu displays a list from which you can choose which type of disc you want to burn:
Bootable Disc, Drivers and Applications Restore Disc, Application Disc, or Recovery Disc.
3
Select Recovery Disc, then click [Make DVD]
4
Confirm that the # box has "2" (Note that in some cases the box may display a larger number for the factory
image, depending upon its size.)
5
The message "Recovery Disc #1. will be created. Enter your comments and number of media on the DVD".
Click [YES] to burn the Factory Image.
I
N THE FOLLOWING STEP
6
While the copy is being made, a "Writing to the media" screen displays a progress bar. When the copy is
complete, a dialog will appear informing you of the successful completion of the backup.
7
Repeat the process for the remaining three images on disc (Bootable Disc, Drivers and Applications Restore
Disc, and Application Disc). The number of images available may vary depending on your system model; some
models do not have the applications loaded on the hard drive.
L B
IFE OOK MODELS DO NOT HAVE APPLICATIONS LOADED ON THE HARD DRIVE
DAR
DISC
.
,
DO NOT USE THE SYSTEM UNTIL THE COPY IS COMPLETE
97
. P
LEASE TAKE THAT INTO ACCOUNT WHEN READING THE FOLLOWING
;
.