Nikon SF-210 Manuel De L'utilisateur page 29

Slide Mounts That Can Be Used in the SF-210
• The following mounts have been tested and approved for use in the SF-210:
FUJICHROME 1.4–1.5 mm, plastic or square cardboard KODACHROME mounts the same
shape as FUJICHROME mounts, plastic or square cardboard EKTACHROME mounts the same
shape as FUJICHROME mounts, Ektachrome PROCESS, GEPE 2 mm, GEPE 3 mm, AGFA CS,
AGFA refl ecta CS, hama fi x, Kaiser USA, REVUE
• The following mounts can be used only in restricted orientations:
Mount
WESS
hama DSR
• The following mounts are known to cause jams:
Kodachrome/
Ektachrome
Cardboard mounts
1.1 mm thick with
rounded corners
Mount
PLASTIMOUNTS
Cautions
Insert with the photograph fac ing the push
plate. Slides can be inserted in either orien-
tation if the feed mechanism attachment is
used.
Insert with the photograph fac ing the push
plate.
Pakon
Notes
Burred or peeling
mounts and mounts
with uneven or ir-
regular surfaces can
cause the feeder to
jam. To help pre -
vent the feeder from
jamming or feeding
several slides at once,
open the slide feed
slot to about one -
and-a-half times the
thickness of the slide
mounts.
11-En