Nikon SF-210 Manuel De L'utilisateur page 27

The Slide Feed Slot
In most cases (for example, when scanning slides with mounts of different thicknesses), the slide
feeder works best with the slide feed slot fully open.
Slide feed slot
Slide
The width of the slide feed slot is controlled by the feeder adjustment dial.
Feeder adjustment
plate
Scanning Slides of the Same Thickness
If the mounts are all the same thickness, the slide feed slot should be about one-and-a-half
times the thickness of the slide mount (see illustration below). This will help prevent the feeder
from jamming or feeding several slides at once
Feeder adjustment plate
SF-210 slide feeder
(viewed from above)
Feeder adjustment dial
SF-210 slide feeder
(viewed from above)
9-En