How To Adjust The Height; Of Baby Walker Frame - Baninni TOTTI Mode D'emploi

How to change the walker to
WARNING
To convert to a push-walking mode, for
safety, firstly tighten the two rear grip wheels,
then take off seat and remove detachable
rear bar on bottom base.
How to Adjust the Height of Baby Walker Frame
How to Adjust the Height of Baby Walker Frame
WARNING: When opening, closing or adjusting the walker, ensure that When opening, closing or adjusting the walker, ensure that your child is at a safe
When opening, closing or adjusting the walker, ensure that your child is at a safe
your child is at a safe distance. Before placing the child in the walker
distance. Before placing the child in the walker, ensure that the secondary lock
distance. Before placing the child in the walker, ensure that the secondary lock
ensure that the secondary lock button is correctly locked again.
button is correctly locked again.
button is correctly locked again.
Step 10
Step 10
10. To adjust the seat's height, remove the child from the baby walking frame, pull up the safe button
located under the small tray table and rotate it to 90 degrees. keep the safe button pressed, then
raise or lower the small table until the desired position is reached, then pull up the safe button and
rotate it to 90 degrees again to lock the small table.(If it is a automatic secondary lock, please make
sure the lock is rotated to 90 degrees.)
10. To adjust the seat's height, remove the child from the baby walking frame, pull up the safe button
located under the small tray table and rotate it to 90 degrees. Keep the safe button pressed, then raise or
10. To adjust the seat's height, remove the child from the baby walking frame, pull up the safe button
lower the small table until the desired position is reached, then pull up the safe button and rotate it to 90
located under the small tray table and rotate it to 90 degrees. keep the safe button pressed, then
degrees again to lock the small table. (If it is a automatic secondary lock, please make sure the lock rotated
to 90 degrees.) raise or lower the small table until the desired position is reached, then pull up the safe button and
rotate it to 90 degrees again to lock the small table.(If it is a automatic secondary lock, please make
sure the lock is rotated to 90 degrees.)
U shape
How to adjust the height of
baby walker frame
90 degrees 90 degree
rotation rotation
90 degrees 90 degree
rotation rotation
The front
press
The front
press
5
ENG
19