Intended Use - Ivoclar digital PrograScan PS3 Mode D'emploi

Safety
Nevertheless, the following dangers can occur in case of incorrect
operation or misuse:
• Risk of fatal or personal injury to operator or third party
• Damage to the scanner or material assets of the operating
company
• Risk to the efficiency of the scanner
2.1

Intended use

The intended use of the scanner PrograScan PS3 / PS5 covers the
three-dimensional, optical measurement of human jaw models in
combination with the supplied software. The scanner also allows the
measurement of articulated models, using the appropriate Ivoclar
accessories.
Only impressions and plaster casts of jaws as well as articulators with
such may be used (1500 g maximum). Dimensions W x L x H: 200
mm x 200 mm x 160 mm. Only accessories specified by Ivoclar may
be used. The scanner is designed to be mounted at an ergonomic
height (observe the health and safety regulations in your country).
Any other use requires the written consent of Ivoclar Vivadent AG.
Incorrect use can lead to danger to persons and damage to the
scanner. The PrograScan PS3 / PS5 must be loaded manually, it does
not function independently. For this reason the product may only
be operated after the operator has read and understood these
Operating Instructions.
Furthermore, liability and warranty claims are invalid if the scanner
is used in a manner other than intended. The PrograScan PS3 / PS5
may only be operated in accordance with the operating conditions
specified in these Operating Instructions.
2.1.1 Potential improper use
The information contained in these Operating Instructions describes
the product's properties without guaranteeing them. No liability will
be assumed for damage caused by:
• Improper use of the scanner.
• Ignoring these Operating Instructions.
• Unauthorized changes to the scanner.
8