Installation; Installing The Scanner - Ivoclar digital PrograScan PS3 Mode D'emploi

Installation

5 Installation
Only use with the supplied power supply unit and power cable!
The power pack must be connected to a socket with a protective
conductor contact.
Technical data of power supply unit
Characteristics
Manufacturer
Type
Input
Output
5.1

Installing the scanner

NOTICE! Increased electromagnetic radiation.
Damage to the scanner.
f Ensure that the installation site is free of increased
electromagnetic radiation.
Ensure that the power switch (1) is in position "0" before installation
(the position of the power switch can vary depending on the
model).
f Connect the power supply connection (2) to the mains using the
supplied power cable.
22
Value
Chicony
A11-065N1A
100 – 240 V (+/-10 %) ~ 50 – 60 Hz, 1.7 A
19 V, 3.42 A