Personnel Qualifications - Ivoclar digital PrograScan PS3 Mode D'emploi

Safety
f Consider the national employee protection conditions as well as
the national safety and accident prevention regulations.
f Ensure that during service, maintenance or cleaning work,
safeguards are in place to prevent the scanner from being started
up without authorization.
f Only use original replacement parts approved by the
manufacturer. Otherwise guarantee regulations and product
liability risks could be affected.
f Ensure that the notes attached to the scanner when delivered
remain clearly legible. Missing or damaged warning signs must be
replaced immediately.
2.4

Personnel qualifications

These Operating Instructions are intended for the personnel who
operate and maintain the scanner.
The operating and maintenance personnel must be selected by the
operating company and must fulfil the following requirements:
• Basic technical skills
• Read and understand these operating and maintenance
instructions.
• Operators must not be visually impaired.
• The person must be strong enough to lift the scanner and move it
to its final location.
The following measures must be carried out by the operating
company to ensure appropriate knowledge of the scanner's
operation:
• Product training (written confirmation by the trained persons)
• Regular safety instruction
• Inspection, maintenance, cleaning and repair may only be carried
out by technical specialists with product-specific training
• Mechanical and/or electrical training
10