Fiamma TURBO-VENT P3 Instructions De Montage Et Mode D'emploi page 11

EN TROUBLESHOOTING
Problem
The fan doesn't rotate
The fan rotates without
ventilating the inside of the
vehicle
* Ensure that the power supply has been disconnected before carrying out
WITH THE CONVENIENT AND ELEGANT ADDITIONAL KIT
Power voltage is less
than 10 Vdc
The cables are
incorrectly connected
Foreign bodies are
blocking the blade
Power failure
None of the above
causes
Deviator in exhaust position
any kind of operation, than reconnect.
FROM NOW ON YOU CAN ENRICH
YOUR TURBO-VENT P3
Cause
Charge the battery,check
that the voltageis 12 Vdc
Check that connections
correspond to wiring
diagram*
Remove any obstructions
from the blade*
Check the fuses in the
main control panel*
Contact your Fiamma
Service Centre
Solution
Set the deviator to
ventilation mode
®
11