Bosch GPO 950 Professional Notice Originale page 14

14 | English
explosion. Penetrating a water line causes property dam-
age or may cause an electric shock.
Release the On/Off switch and set it to the off position
u
when the power supply is interrupted, e. g., in case of
a power failure or when the mains plug is pulled. This
prevents uncontrolled restarting.
Products sold in GB only:
Your product is fitted with an BS 1363/A approved electric
plug with internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an au-
thorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Secure the workpiece. A workpiece clamped with
u
clamping devices or in a vice is held more secure than by
hand.
Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended for polishing metal and coated
surfaces.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Speed preselection thumbwheel
On/off switch locking mechanism
(2)
(3) On/off switch
(4) Guard plate
(5) Auxiliary handle (insulated gripping surface)
(6) M14 adapter
(7) M16 adapter
(8) Adhesive disc (M16)
(9) Flat polishing sponge
a)
(10) Lambswool pad
(11) Wavy set polishing sponge
(12) Polishing disc with sponge
(13) Open-ended spanner (2x)
(14) Handle (insulated gripping surface)
1 609 92A 3S8 | (11.08.2021)
(15)
a) Accessories shown or described are not included with the
Technical Data
Polisher
Article number
Rated power input
Power output
Rated speed
Speed adjustment range
Max. polishing disc diameter
Thread size adapter
Soft start
Speed preselection
Constant electronic control
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Noise/Vibration Information
Noise emission values determined according to
EN 60745-2-3.
Typically the A-weighted noise level of the power tool are: 80
dB(A); sound power level 91 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 60745-2-3:
Polishing:
a = 7.5 m/s
h
The vibration level given in these instructions has been
measured in accordance with a standardised measuring pro-
cedure and may be used to compare power tools. It can also
be used for a preliminary estimation of exposure to vibra-
tion.
The stated vibration level applies to the main applications of
the power tool. However, if the power tool is used for differ-
ent applications, with different application tools or poorly
maintained, the vibration level may differ. This can signific-
antly increase the exposure to vibration over the total work-
ing period.
To estimate the exposure to vibration accurately, the times
when the tool is switched off or when it is running but not ac-
tually being used should also be taken into account. This can
a)
significantly reduce the exposure to vibration over the total
working period.
a)
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping the hands warm,
and organising workflows correctly.
Direction of rotation arrow on housing
product as standard. You can find the complete selection of
accessories in our accessories range.
min
min
(triax vector sum) and uncertainty K
h
2 2
, K = 1.5 m/s
GPO 950
3 601 CA2 0..
W 950
W 539
-1
2100
-1
600–2100
mm 180
M 14/M 16
●
●
●
kg 2.3
/ II
Bosch Power Tools