I Optimising Cleaner Performance - Zodiac KONTIKI 2 Notice D'installation Et D'utilisation

3.4 I Optimising cleaner performance

The robot follows the pool filter pump activation cycles, sucking and cleaning the entire pool surface using random
movements. The cleaner coverage rate depends on the shape of the pool and the available water flow. Adjustments
may be required in some pools to optimise the coverage rate.
3.4.1 Hose balancing
• A correctly balanced hose must form a 45° angle between the cleaner and the bottom of the pool.
EN
Incorrect hose balance* Correct hose balance Incorrect hose balance*
* See § 5.1 I Device behaviour: «The cleaner doesn't clean every area in your pool».
11