Din Front-Mount - Pioneer AVH-P7500DVD Manuel D'installation

DIN Front-mount

Installation with the rubber bush
1. Decide the position of the side
brackets. (Fig. 20)
When installing in a shallow space,
change the position of side brackets. In
this case, stick conceal tape on parts
that protrude from the dashboard.
Side bracket
Flush surface screw (5 × 6 mm)
2. Install the unit into the dash-
Conceal tape
Fig. 20
board. (Fig. 21)
After inserting the holder into the
dashboard, then select the appropriate
tabs according to the thickness of the
dashboard material and bend them.
(Install as firmly as possible using the
top and bottom tabs. To secure, bend
the tabs 90 degrees.)
Dashboard
182
53
Holder
Side bracket
Screw (2 × 3 mm)
• After installing the unit into the
dashboard, reattach the frame.
Rubber bush
Screw
Fig. 21
18