Jimmy HW8 Mode D'emploi page 14

Floorhead does not spray
water
Floorhead does not spray
water
Floorhead does not spray
water
Floorhead does not spray
water
Water spray out from air
exhaust
Water spray out from air
exhaust
Water spray out from air
exhaust
Water spray out from air
exhaust
Water spray out from air
exhaust
Water spray out from air
exhaust
Note: If the above troubleshooting guide fails to provide a solution, please contact after service or local
distributor for support.
12
Clean water tank empty
Water spray button not
pressed
Clean water tank not
assembled properly
Clean water tank is filled with
dirty water and blocked water
path.
Filter is not dry after washing
Water in dirty water tank
achieves MAX line
The product was heavily
shaked or hits the wall with
big force
Filter is not assembled
Float is not assembled
Filter is put to use without
fully dry
Fill clean water tank
Press water spray button
Reassemble clean water tank
Do not fill clean water tank
with dirty water
Dry the filter after washing
Clean dirty water tank
Clean dirty water tank
Assemble filter
Assemble float
Dry the filter after washing
before use