Jimmy HW8 Mode D'emploi page 13

Troubleshooting
Please check the following points before contacting the after sale service.
Problem
Machine does not work
Machine does not work
Machine does not work
Machine does not work
Machine does not work
Machine does not work
Weak suction
Weak suction
Weak suction
Weak suction
Weak suction
Abnormal noise
Abnormal noise
Possible cause
Low battery power
On/off button is not pressed
down
Brushroll is entangled
Water in dirty water tank
achieves MAX line
On/off button or mode button
is pressed at the same time
with water spray button
The product is in upright
position
Water in dirty water tank
achieves MAX line
Brushroll window and dirty
water tank not assembled
properly
Brushroll entangle
Filter gets dirty
Lower battery power
Suction inlet blocked
Water in dirty water tank
achieves MAX line
Solution
Recharge battery
Press down on/off button
Clean brushroll
Clean dirty water tank
Release water spray button,
press on/off button or mode
button separately
Release the floorhead and
then brushroll can work
Clean dirty water tank
Reassemble brushroll
window and dirty water tank
Clean brushroll
Clean or replace filter
Recharge battery
Clean suction inlet
Clean dirty water tank
11