Help Information - Hofmann geodyna 7850p Mode D'emploi

36
4-14
4-14a
4-14b
4-15
Layout
4.3

Help information

Help information explains the current action and, in
the case of an error code, provides hints for remedy.
Display help information
— Press the HELP key (Fig. 4-14).
The fi rst screen with help information appears, e. g. to
the screen RIM DATA INPUT (Fig. 4-14a).
— Press the HELP key once more to display the next
screen with help information.
(if present)
The second screen with help information to the screen
RIM DATA INPUT (Fig. 4-14b) appears.
Note:
On pressing the HELP key in the last screen with help
information the display jumps to the fi rst screen again.
Quit help information
— Press the ESC key.
4.4 Stop / Function taste
Refer to Figure 4-15.
To perform an immediate stop:
• Press the STOP button;
The electronic brake is activated to immediately stop
wheel shaft rotation, as well as any other balancer (if
present) automatic movement.
In the event of a stop due to an unexpected action by
the unit, reconstruct the steps taken
:
Did the operator make an error or omit to do
something?
Correct the input and continue working. No special
procedure is required.
Did the unit do something unexpected?
• Read the relevant chapters again.
• Prepare the unit for a restart:
switch off the unit
switch on the unit again.
• Carefully repeat the commands with the manual
available.
• If the unit does not function correctly,
WARNING: PREVENT ANY FURTHER USE OF THE
UNIT.
• Call the service team immediately.