IKUSI MAC 201 Manuel D'utilisation page 40

Unit installation and confi guration
Locate and select the option FREQUEN-
a)
CY. Confi gure the output frequency value
between 45 MHZ and 865 MHZ.
Locate and select the option ATTENU-
b)
ATION. Select the output attenuation
between 0 and 47 dB.
Locate and select the option OFDM
c)
MODE. Select the OFDM mode between
2K and 8K subcarriers.
Locate and select the option BAND-
d)
WIDTH. Select the bandwidth between 6,
7 and 8 MHZ.
Locate and select the option GUARD
e)
INTERVAL. Select the guard interval be-
tween 1/32, 1/16, 1/8 and 1/4 of symbol.
Locate and select the option CONSTEL-
f)
LATION. Select the modulation constella-
tion between 16QAM and 64QAM.
Locate and select the option CODE RATE.
g)
Select the code rate between 1/2, 2/3, 3/4,
5/6 and 7/8.
Status of the unit
NOTE
The unit lets you see its status in detail and the existence of active alarms in the
module.
Locate and indicate STATUS.
1)
Locate and indicate STATUS: **. The unit
a)
displays its status and alarms: OK / ER-
ROR.
40
/ Main menu